How to know your Caster Stem specification?

Home > Solutions > How to know your Caster Stem specification?

Let Enjoying Go show you how to measure a caster stem, then when you purchase a new caster from us, it will fit your chair perfectly. 

You need to prepare a piece of paper. Follow 4 steps below to start measuring caster stem: (The example uses Enjoying Go’s caster) 
Step 1. Cut a paper into a slender rectangle.     

Step 2. Wrap the paper around the stem.   

 Step 3. Mark the paper at the overlap and flat the paper on the table.   

 Step 4. Measure the length to the mark. The result of the measurement is 3.14 cm. Let’s see the size correspondence:     

*   3.14 cm corresponds to the width of 10mm     

*   3.454 cm corresponds to stem width of 11mm

Tips from Enjoy Caster:   

 ․The caster stem width of 10mm is the special stem. (usually for some IKEA chair)   

 ․The caster stem width of 11mm is the universal stem.

 If you have any question of measuring caster stems, welcome to contact with Enjoying Go!  Welcome to check out Enjoy Caster catalog for more swivel caster wheels.
Enjoy Caster, Change for the better.